NO. 30-30 SEMI-GLOSS CLASS “A” FIRE RETARDANT ENAMEL OVERCOAT

PRODUCT DESCRIPTION:

No. 30-30 Semi-gloss Class “A” Fire Resistant Enamel is a non-yellowing interior paint, which is recommended for use as an overcoat in areas where maximum cleansibility, durability and fire retardancy is required. No. 30-30 was designed as an overcoat for No. 10-10 and 1500° Series FRL, or it can be used as a fire resistant coating by itself on all noncombustible surfaces, where a Class “A” finish must be maintained. When applied over No. 10-10 or 1500° Series FRL the durability of the coatings are greatly improved.

SURFACE PREPARATION:

Wood and combustible Surfaces:

Please refer to No. 10-10 or 1500° Series FRL product information sheets.

Noncombustible Surfaces:

Dirt, grease, oil and other foreign matter must be removed. Dull all glossy surfaces.

APPLICATION:

Stir well before using. Can be brush, spray or roller applied. If applied by spray, heavy duty spray equipment is recommended. Thinning is not recommended; however, if desired for spray application, use only Special Reducer for No. 30-30 or Odorless Mineral Spirits.

SUGGESTED COVERAGE RATE:

400 sq.ft./U.S. gallon [9.83 m2/L] in one or two coats.

DRYING TIME:

Dries to touch in approximately 2-3 hours, hard dry overnight. Allow at least 24 hours drying time before re-coating.

THINNERS:

For thinning and cleaning equipment, use Special Reducer for No. 30-30 or Odorless Mineral Spirits.

FIRE TESTS:

Flame Spread Rating: Class “A”. When tested in accordance with ASTM E-84 (NFPA 255) the coating obtained the following fire hazard classifications.

FIRE HAZARD CLASSIFICATION
System Details	(When applied to GRC Board)
System Details	Flame Spread	Smoke Developed
Primer – None
Type 30-30 applied in one coat at 400 sq.ft./U.S. gallon [9.83 m2/L] Topcoat - None	5	20

TINTING:

Available in white, off white, and pastel shades, or may be field tinted with most universal or oil tinting colorants. Tinting colorants should not exceed 4 fluid ounces per gallon.

PACKAGING:

Standard packaging, 1 gallon, 5 gallon, and 55 gallon containers.

PRECAUTIONS:

CAUTION! CAUTION! CAUTION! The liquid coating contains Mineral Spirits, a COMBUSTIBLE solvent. Due care must be exercised during and after application until the coating is dry. Keep away from heat, sparks and flame. Avoid prolonged contact with skin. Avoid breathing vapors or spray mist. Open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA TO 23C or equivalent) or leave the area. Do not take internally. Close container after each use. use with adequate ventilation. NOTICE: Reports have associated repeated and prolonged occupational over-exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.

KEEP OUT OF REACH OF CHILDREN.

All specifications and suggestions appearing on our labels and in our literature concerning the use of our products are based upon tests and data believed to be reliable. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by New York Fire-Shield as to the effects of such use or the results to be obtained.