NO. 6 CLEAR WOOD SEALER

PRODUCT DESCRIPTION:

No. 6 is a crystal clear, hard, wood sealer, developed primarily for use with fire retardant varnishes.

SURFACE PREPARATION:

Surfaces must be clean, dry and free from all loose or powdery materials, grease, wax or other foreign matter. All staining and filling must be done using non-bleeding type stains prior to the application of No. 6 Sealer.

APPLICATION:

(New work) Previously uncoated surfaces:

Apply a full bodied coat by brush, at a coverage rate of 300-450 square feet/US gallon (360-540 square feet/Imperial gallon). Coverage rate depends upon the porosity of the wood. Highly porous woods may require a second coat of No. 6 Sealer.

(Old work) Previously coated surfaces:

Previously varnished surfaces must be sanded to remove all gloss, loose or poorly bonded varnish. Test patch a small area to determine the compatibility of No. 6 Sealer with existing coating, to insure that no lifting or wrinkling occurs. If lifting or wrinkling develops, it is necessary to completely remove the old finish before proceeding.

COVERAGE:

300-450 square feet/US gallon (360-540 square feet/Imperial gallon), depending on porosity of the wood.

THINNERS:

For thinning and cleaning equipment, use only No. 6 Reducer.

WARNING:

Adequate ventilation must be provided during and after application, until the coating has dried. Avoid breathing vapors or spray mist.

PACKAGING:

Standard packaging 1 gallon, 5 gallon and 55 gallon containers.

PRECAUTIONS:

CAUTION! The liquid coating contains volatile (flammable) solvents. Due care must be exercised during and after application until coating is dry.

All specifications and suggestions appearing on our labels and in our literature concerning the use of our products are based upon tests and data believed to be reliable. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by New York Fire-Shield as to the effects of such use or the results to be obtained.