20-20A is a Class “A” (FS5) rated, Interior latex, fire- retardant paint. Water reducible. It dries to a flat finish and is designed primarily for use on combustible substrates. Can be overcoated with No. 40-40, to obtain a low-gloss finish.
155 sq.ft./gal. – one or two coats
No. 10-10A is a Class “A” (FS10) rated, Interior fire retardant paint. Mineral spirits reducible. It dries to a flat finish and is primarily designed for use on combustible substrates, i.e.: wood particleboard, cellulose board, ceiling tile, etc. Can be overcoated with No. 40-40, to obtain a low-gloss finish.
190-230 sq.ft./gal. – one or two coats
No. 40-40 is a Class “A” (FS10) rated, water reducible low gloss latex fire resistant paint, designed for use on all non-combustible surfaces, i.e. plaster, drywall, concrete, block brick, etc. Also rated as a Class “A” overcoat for flat fire retardant paints. Dries in approximately 2 hours, and yields a highly scrubbable-cleansible finish.
330-625 sq.ft./gal.
No. 60-60A is a 15 Minute Thermal Barrier Coating for I nterior use on Sprayed Polyurethane Foam. Accepted for use as an Ignition Barrier in Attics and Crawl Spaces.
*Recommended Coverage Rate Vary
No. 141 Polyurethane Varnish is a Class “B” (FS60) clear, transparent flame retardant finish, for interior use on gym floors and other wood floor surfaces where maximum resistance to abrasion, scrubbing and washing is required. Available in both semi and high gloss.
400 sqft/gal. – 2 coats required
Class A Varnish Base Coat is a Class “A” (FS20) Fire Retardant Varnish. Interior use, provides a satin finish. Solvent based. Not recommended for use on floors or doors, but great for wainscoting, paneling, trim & molding, dimensional lumber, plywood, handrails, shelving and many other interior applications.
300 sq.ft./gal. – 2 coats required
Class A Varnish Top Coat is a Class “A” (FS20) Fire Retardant Varnish Overcoat. Interior use, low-semi and hi-gloss sheens available. Solvent based. Recommended overcoat for Class A Varnish Base Coat.
600 sq.ft./gal.
No. 129 Fire Retardant Varnish Base Coat Class “B” (FS45) is suitable for Interior applications. Solvent base; great for hard use surfaces except floors.
300 sq.ft./gal.
No. 130 Fire Retardant Varnish Overcoat for No. 129 Class “B” (FS45). Available in Low, Semi or Hi-gloss. Suitable for use on Interior applications. Mineral Spirits reducible; great for hard use surfaces except floors.
600 sq.ft./gal.
No. 133A Fire Retardant Polyurethane Varnish Class “B” (FS55) is a water base, 1-component (2 coat) application. Semi-gloss sheen will not leach or turn white on aging or washing.
450 sq.ft./gal – 2 coats required
No. 10VOC Clear Fire Retardant Penetrating Wood Treatment is a Class “B” (FS35) Exterior use fire retardant treatment. Designed for cedar shakes and shingles, it is also excellent for use on decorative bark nuggets or mulch in Shopping Malls, Exhibits and Hospitality Facilities.
300 sq.ft./gal/coat – 2 coats required
No. 5 Exterior Fabric Flame Retarder is solvent based compound, designed to retard the burning of fabrics that may be exposed to weather and will repel water. Properly treated items will meet the requirements of NFPA 701-75.
Please contact us for additional information on our products, application rates, technical data and independent test reports.